Eliet DZC450, Руководство пользователя

Страница: 42 / 108

42
English
c. Setting the seed flow rate
To adjust the seed flow rate, there is a function on the left-hand
side of the machine at the seed funnel.
Please note: The seed flow rate always depends on
the chosen seed mixture and the production year. The
seed flow rate must always be checked and adjusted if
another seed mixture is chosen or if seed from a dif-
ferent production batch is used.
Preparation:
In order to adjust the seed flow rate, the seed funnel must be filled with the desired seed
mixture. (always pour in a full 10 kg - 22 lbs bag)
5 things must be checked before refilling the seed reservoir:
• Check that the seed funnels of the seed distribution system are not clogged. Position the
machine on the Easy Clean
TM
maintenance support for inspection. (read § 9.7; page 57)
Unclog any clogged funnels.
• Check through the transparent wall whether the seed distribution system is completely
empty. If necessary, empty it first. (read § 9.6.5; page 56)
• Check that no traces of condensation or moisture deposits can be observed in the seed dis-
tribution system. If there is moisture, first allow it to dry.
• Check whether the seed flow slider moves correctly back and forth when activating the yel-
low seed lever.
• Check that the two augers are driven when the yellow seed lever is activated. To test this,
drive the machine. (read § 9.6.1.1; page 49)
If all the above check points are met, the flow rate can be set.
Please note: When filling the seed reservoir, the grass seed must be poured
out in doses and the seed flow must be controlled. This is to avoid any foreign
objects (e.g. small stones, sticks, grass clippings, etc.) ending up in the reservoir.
Also avoid that any paper from the bag ends up in the reservoir. This can cause
the seed distribution system to jam or the seed distribution slider not sealing
correctly when releasing the yellow seed lever.
In principle, any grass seed can be used. ELIET recommends seed mixtures developed
especially for overseeding or renovation. The setting of the seed flow rate depends on the
composition of the seed mixture, and therefore needs to be adjusted via measurement.