manualshive.com logo in svg

Eliet DZC450, Руководство пользователя

Поделиться
Скачать
Eliet DZC450 Скачать руководство пользователя страница 64

64

English

9.8.5. A trail of damage to the lawn

Whilst overseeding, you may notice a trail of damage in a worked strip. Possible causes may be:
• Since the blades do the ground work, examine these first. Presumably, one or more blades 

has struck an object in the ground, causing it to become bent and carve out wide, unsightly 
grooves.

• Read '§ 11.4.4. Checking the blades on page 73' to trace irregularities.
• There may also be something wrapped around the blade shaft that causes a trail of damage.

9.8.6. Unintended activation from transport or operation mode.

If ever during operation or overseeding, the machine suddenly switches from transport mode to 
operation mode, then the following problems could arise as a result:
• Locking remains in place after operation: check, clean, or replace the locking mechanism if neces-

sary.

• The cable of the lock is dirty and shifts with difficulty. After releasing the depth lever, the cable 

prevents the bolt from being fully closed again. Clean the cable guide.

• The depth lever has been unintentionally activated by one or other obstacle (e.g. when driving 

along a hedge or bush).

9.8.7.  The machine remains stuck in transport mode

If during driving or overseeding the front wheel arch can no longer move to transport mode, or 
transport mode can no longer be moved to operation mode, then the following problems may be 
the cause:
• The hinges of the front wheel arch are stuck because of dirt or insufficient lubrication: clean 

the hinge and apply lubricant liberally.

• Dirt is piling up between the front wheel arch and the chassis: thoroughly clean the gap bet-

ween the front wheel arch and the chassis.

• The cable that operates the locking mechanism is or broken or jammed. Adjust, and clean, add 

lubricant, or replace these if necessary.

9.8.8. The machine loses traction while driving or operating

If, while driving or overseeding, you have the feeling that the machine is losing traction and you 
have to nudge the machine to move it forward, then the following causes may be possible:

a.  The torque limiter is slipping
b.  Insufficient chain tension
c.  Broken chain
d.  Loose sprocket wheel
e.  Insufficient activation of transmission box
f.  Defective transmission box
g.  Freewheel bearing jammed
h.  Soiling of the cable

Содержание DZC450













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды