manualshive.com logo in svg

Eliet DZC450, Руководство пользователя

Поделиться
Скачать
Eliet DZC450 Скачать руководство пользователя страница 93

93

English

II.  Replacing the belt pulley of the belt tensioner of the ejector accelerator

The belt pulley is made of plastic and has one bearing. Since a belt pulley is used to tighten 
the belt, there is a larger contact surface, which results in less slippage. Since this pulley has 
no function as a coupling, there is also less wear and tear during frequent switching on and 
off. Nevertheless, it is advisable to regularly inspect the condition of the V-groove and check 
for possible play on the bearing. As soon as wear and tear is detected, the belt pulley must 
be replaced. 
(order code BA 564 705 002)

How to proceed:

• Disassemble the protective cover of the machine  

(read § 15.1; page 99) 

• The belt pulley is secured to the axle by means of a locking clip. 

A special tong can be used to remove the locking clip from the 
groove.

• Press the belt pulley off the central axle.
• Slightly sand the axle and apply some lubricant so that the new 

belt pulley fits smoothly.

• Apply some extra lubricant to the bearing joints to avoid dirt 

penetrating around the new belt pulley.

• Put the safety clip back into the groove.
• Re-assemble the black cover as it was originally. (read § 15.1; page 99) 

Содержание DZC450













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды