Eliet DZC450, Руководство пользователя

Страница: 33 / 108

33
English
9. Operating instructions
9.1. Preliminary checks
Please note: Before starting the work, it is recommended to get into the habit
of checking the following points:
Checklist
• Check the total number of hours the machine has operated and compare this to the maintenan-
ce table. Perform maintenance as necessary. (read § 11.2; page 69)
• Perform a visual inspection of the condition of the machine (read § 11.4.1; page 70)
• Check the oil level. Pull out the dipstick and check whether the oil level is below minimum (read
§ 11.4.2; page 71)
• Check in advance that the fuel tank is full. If not, top it up (read § 9.4.2; page 46)
• Check the air filter for excessive dirt. Clean if necessary.
(read § 11.4.3; page 72)
• Check the blades for wear (read § 11.4.4; page 73)
• Check that the belt tension is adequate. If not, it can be adjusted.
(read § 11.5.3; page 84)
• Check that the blades are not bent. If necessary, straighten the blades again.
• Check that the flow setting of the machine is correctly adjusted. (read § c; page 42)
• Check that the machine has been cleaned and there is no dirt or accumulation in the housing at
the blade axle, ejector accelerator and outlet channel.
• Check that the seed funnels at the seed distribution system are clear.
• Check whether the depth has been set correctly. (read § b; page 40)
• Check that all protection covers are present and properly in place.
(read § 15.1; page 99)
• Check that all safety features on the machine are still operating properly.
(read § 7.2; page 16)
• Check whether the engine operates at the given rotational speed (3,500 RPM) Never attempt
to change the default engine settings. Install the optional hour counter, this has a built-in revo-
lution counter, making this easy to check.
(art. code: BE 412 410 000)
Once these points have been checked and approved, the work area can be prepared (read § 9.3;
page 34) and the machine can be moved onto it.