Eliet DZC450 Скачать руководство пользователя страница 82

Страница: 82 / 108

English

• New lubricant may now be sprayed into the guide.
• The procedure is the same for all other friction surfaces mentioned earlier: first loosen old

grease and dirt with KLEENSPRAY and wipe it away.

• Then spray NOVATIO PTFE OIL on the friction surface. (NOVATIO PFTE OIL for cable guides).

V. Lubrication nipple

One lubrication nipple is fitted on the machine. This is located at the end of the output axle
of the transmission box and serves to lubricate the freewheel bearing in the torque limiter.

• In order to reach the lubrication nipple, the large protective

cover must be removed.(read § 15.1; page 99)

• Use a lubrication pump to slowly pump extra lubrication grease

into the lubrication nipple. Use the lubricant shown in the list on
'§ 11.3. Lubricants on page 70'.

Please note:

As soon as you feel pressure when pumping or the grease comes

along the joints from the bearing, stop immediately.

• Lubricant that flows back from the joints or along the grease nipple when removing the

pump hose, must be wiped away with a rag.

• Replace the protective covers as they were originally fitted.

All lubricants indicated are available from your authorised ELIET dealer.

Содержание DZC450













































































































Результаты поиска

Содержание DZC450

Отзывы:

Бренды по названию

Популярные бренды

Eliet DZC450, Руководство пользователя

Результаты поиска

Содержание DZC450

Отзывы:

Бренды по названию

Популярные бренды