manualshive.com logo in svg

Eliet DZC450, Руководство пользователя

Поделиться
Скачать
Eliet DZC450 Скачать руководство пользователя страница 7

7

English

5.  Safety symbols

ELIET cannot anticipate every situation in which a risk or danger can occur. As such, the war-
nings in this operating manual and the labels on the machine are not comprehensive. Although 
minimal, some risk will always remain. If you apply a working method, operation or technique as 
the operator of the machine that is not explicitly recommended by ELIET, ensure in any case that 
this will not present a danger for third parties.

This manual uses certain symbols ("For your information", "Please note", "Warning") to provide 
additional information and highlight dangers.

5.1.  For your information

For your information:

 This symbol is used to draw your attention to specific in-

formation and/or actions, or it is used to indicate where you can find additional 
information relating to the topic.

5.2.  Please note

Please note:

 This symbol suggests safe practices. The purpose is to prevent in-

correct operation that could result in personal injury or damage to the machine.

5.3.  Warning

Warning:

 This notice warns you of any extreme dangers which you need to take 

into account in these specific circumstances. So for the sake of your own safety, 
remain alert at all times.

These safety messages can only warn of dangers, but not prevent them. Using common sense 
and observing the guidelines contained in this manual are essential to prevent accidents.

Содержание DZC450













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды