manualshive.com logo in svg

Eliet DZC450, Руководство пользователя

Поделиться
Скачать
Eliet DZC450 Скачать руководство пользователя страница 26

26

English

8.  Dealer’s responsibilities

8.1.  Unpacking the machine

ELIET machines are packaged in accordance with standard rules for proper transportation.

For your information:

 Deliveries are always ex works. Consequently, ELIET can-

not be held liable for any damage that occurs during transport.

• If the packaging is damaged upon receipt of the goods, check the state of the machine to ensure it is 

not damaged. Report any irregularities on the delivery slip before signing for receipt.

• In the event of damage to the machine, a complaint to the shipping company must be submitted 

immediately after delivery.

• Before opening the packaging, check that the information on the label affixed to the box corres-

ponds to what is stated on the delivery slip and to what was ordered.

• In the event of discrepancy, contact the ELIET representative immediately to report this.
• After checking the packaging, the machine should be unpacked.

• The machine is attached to a wooden pallet. It is enclosed with a carton sleeve to protect the 

contours of the machine. An opening is provided on each long side so that operators in the logistics 
process can assess the content and weight distribution before lifting and moving the package. The 
carton sleeve is wrapped with transparent film to protect the machine.

• Start by removing the transparent film. Via the openings in the sides it is already possible to conduct 

a visual check of the state of the machine.

• In order to easily remove the carton sleeve, cut 

the box on each side just above the pallet.

• Remove the sleeve sideways at an angle, to 

expose the machine.

• The box contains the following elements:

• Machine
• Manual
• Easy Clean

TM

• Cleaning tool
• A bag with fasteners 
• Stickers for flow adjustment with overseed*

* subject to the applicable partnership with the 
seed supplier in the region.

In order to compactly package the machine, it has not been fully assembled.

Содержание DZC450













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды