ELGO Electronic P40-000 Series, Руководство по эксплуатации

Страница: 38 / 64

System Menu
- 38 -
Next set stepping
The following options can be selected for “next set stepping”:

without no next step setting activated

quantity reached after expiration of the piece counter of the current set, the next set
will be loaded

quantity, set 1 same as “quantity reached”, additionally set 1 will be loaded after
program end
Options

without no options selected

auxiliary function auxiliary functions activated

value retract retract value activated
Operating modes
This parameter determines which modes are possible:

single set

single set+ manual

single set+ program

single set+ program
Pin before parameter
This parameter determines if the service/parameter-level can be achieved with or without password:

off can be looked at without password, but cannot be changed

on parameters can only be changed by using the password 250565.
Sequence of axis (only with two-axes-version)
This parameter determines in which sequence the axes are going to move:

X-axis, Y-axis (Y-axis drives after X-axis)

Y-axis, X-axis (X-axis drives after X-axis)

X-axis + Y-axis (axes drive at the same time)
System equip

off diverse parameters are turned off

on