ELGO Electronic P40-000 Series, Руководство по эксплуатации

Страница: 31 / 64

Axis Menu
- 31 -
Piece counter
This parameter is used to define the piece counter function for the Single Mode:

without piece counter

auto decrement *

auto dec Stop *

auto increment *

auto decrement/ increment *

decrement **

dec Stop **

increment **

decrement/ increment **
- Setting “counter increment”: the piece counter counts up from the current actual value.
- Setting “counter decrement”: the piece counter counts towards zero.
- Setting “counter decrement/increment”: the piece counter is decrementing if a certain number of
items have been assigned. When zero is reached, the “quantity reached” output is set wiping ac
cording to the time deposited in parameter parameter axis

X-/Y-axis

times

quantity
reached. Then the piece counter is incrementing.
* When reaching the position the counter will be activated
** When activating the input “quantity” the counter will be activated
Incremental positioning
This parameter is used to activate the option “absolute / incremental positioning”.

off no selection possible, always absolute positioning

on selection via keypad possible

extern selection via external inputs possible
If this function is activated, one of the following symbols will appear (see

6.2 “Display Functions”):
 target value is absolute position
 target value is incremental po
 target value is incremental position −
If the function is deactivated, no symbol is shown the display and the positioning mode is generally
absolute.
Decimal point

This parameter is used to define a decimal place.
Display option manual
In this register the appearance of the manual button can be selected:

left – right

down – up

forwards – backwards
Unit
The displayed measurement unit can be specified here: mm, inch or degree.
NOTE!
The units of the parameters remain unchanged!