ELGO Electronic P40-000 Series, Руководство по эксплуатации

Страница: 27 / 64

Axis Menu
- 27 -
Axis type
This parameter is used to define the type of axis (for each axis separately).

IN: „Encoder“

for usage with incremental encoder resp. measuring systems

IN: „Analog“

for usage with analog measuring systems resp. sensors

OUT: „Digital“

for positioning via digital drive signals

OUT: „Dig“

for positioning via unregulated analog output

OUT: „PID+Digital“

for positioning via regulated PID analog output
Button manual mode
The function of the keys in manual mode is defined in this parameter.

off The P40 controller buttons F1, F3 are deactivated for the corresponding axis
(the respective axis can only be moved by the correspondingly assigned inputs)

normal

inverted
Drive signal configuration
With configuration of the drive signals different starting combinations for the corresponding speeds can
be adjusted.

Drive signals

Mode 1
3 speeds
Speed = output signals 1-3 ascending
Output 4 sets direction backward
Output signals 1 2 3 4
Creep forward X
Slow forward X X
Fast forward X X X
Creep backward X X
Slow backward X X X
Fast backward X X X X

Drive signals

Mode 2
2 speeds (ELGO Standard)
Independent outputs for forward and backward
Independent outputs for fast and slow
Output signals 1 2 3 4
Creep forward X X
Slow forward
Fast forward X X
Creep backward X X
Slow backward
Fast backward X X
Signal configuration:
Forward:
Drive signal 1
Creep speed: Drive signal 2
Fast speed: Drive signal 3
Backward: Drive signal 4