ELGO Electronic P40-000 Series, Руководство по эксплуатации

Страница: 37 / 64

System Menu
- 37 -
Language

German

English

French

Spanish

Italian

Polish

Chinese
Axes active (only with two-axes-version)
 X-axis

X-axis and Y-axis
Piece counter program
This parameter is used to set the mode of the piece counter during “program” operation.

without no piece counter activated

decrementing when position reached, piece counting is activated

incrementing piece counting is activated via external input
If the piece counter reaches zero, the output is adjusted for a time corresponding to the time stored in
parameter system

system-times

piece counter prog. In addition a next program step can be acti-
vated (this depends on further parameters).
Auxiliary counter
This parameter determines if an additional counter is available.

without auxiliary counter

program

auto-program
If a program counter is activated, it is possible to specify in the "program mode" how many times a pro-
gram is to be run through. If the program counter reaches zero, a new value entry is forced (even if zero
was entered).
With the function “auto program” the next position will be automatically hit after a piece counting pulse
(“piece counter program” has to be configured decrementing).
Number of program blocks

1 = 1000 blocks

2 = 500 blocks

5 = 200 blocks

10 = 100 blocks

20 = 50 blocks
 25 = 40 blocks
 40 = 25 blocks
 50 = 20 blocks