6.3 LANGUAGE
English & German & Turkish & Spanish is standard. (other languages optional)
6.4 SELF-TEST
As soon as your
ThruScan
is turned on, a self-test routine occurs for about 10 seconds during
which time the warning buzzer will sound to warn that the unit is not yet ready for use. Should a
fault in the system be detected a fault code will be displayed upon the LCD display.
Failure Codes
are as follows:
Error 00: The walk through infrared detector is blocked or failed.
Error 01: Left Top Zone - High Metal Detection for a prolonged period.
Error 03: Right Top Zone - High Metal Detection for a prolonged period.
Error 04: Left Centre Zone - High Metal Detection for a prolonged period.
Error 06: Right Centre Zone - High Metal Detection for a prolonged period.
Error 07: Left Bottom Zone - High Metal Detection for a prolonged period.
Error 09: Right Bottom Zone - High Metal Detection for a prolonged period.
Error 11: Left Top Zone - No Detection for a prolonged period.
Error 13: Right Top Zone - No Detection for a prolonged period.
Error 14: Left Centre Zone - No Detection for a prolonged period.
Error 16: Right Centre Zone - No Detection for a prolonged period.
Error 17: Left Bottom Zone - No Detection for a prolonged period.
Error 19: Right Bottom Zone - No Detection for a prolonged period.
Error 26: Battery/Power Supply failure.
(
*
for s3
only 6 error codes i.e.; 00, 06(right panel), 07(left panel), 16(right panel),
17(left panel), 26 is existing)
NOTE: 1) ThruScan also continually monitors itself during normal use. Should any of the
above conditions be detected the fault code will be displayed. If no cause is ascertained
pls. contact to the supplier, service company or factory.
2) WTMD, ThruScan may display a failure code(error 19) if not used or screened for a
long time. In such case try and screen your WTMd with an unclean object with metal. If
error message continue pls. contact your service company or supplier. Thus be sure
that detection is performed in all areas
.
6.5 SENSITIVITY
ThruScan
has 246 sensitivity settings available for each security level(channel) providing a high
degree of detection accuracy. Sensitivity is used to calibrate the detector to detect precise quantitiy
of metal for any defined object.
NOTE:
ThruScan
is a highly advanced and reliable security metal detector. However, its
success ultimately depends on the training and diligence of the person who operate it
and the overall security plan of which it is a part.
31
