10.3 IRDA REMOTE CONTROL UNIT MANUEL
**) to start procedures. Thus first 4 digit pin-code
umbers should be entered from remote.
Pin Code Insertion:
It is necessary to insert 4 digit pin-code (**
n
(RUN(X)) button returns the WTMD to its operational model and exits from IRDA programming
ode.
m
Security Level,
Alarm Tone Level. b) To return to sub-Menu from Remote Control Menu.
a) Used to return back to operational mode(WTMD) after adjustments performed such as
To shut off the alarm tone.
V +
To adjust the volume of alarm tone level. (increase/decrease)
CH +
Security Level Adjustments. (increase/decrease)
Counter Visibility (on / off)
Alarm Counter Reset (make nil)
coming/outgoing counters. (select 1 for incoming & select 2 for outgoing or select 3 for both
counters)
To Reset in
Return to factory defaults.
Security Level Adjusts (adjusts between security level “NC” and security level “AD” for sX series)
P0-P9
YES button (to select YES/OK in all above MENUs)
NO button (to select NO/REJECT in all above MENUs)
L
Language Selection; 1. English, 2. German, 3. Turkish, 4. Spanish
47
