3. CONTROL (DISPLAY) PANEL & INDICATION INFORMATION
The control panel functions are protected from unauthorized tampering by a lockable
see through control cover in the overhead main Control Unit. Operators should not
normally need to adjust these controls, which should only be altered by a supervisor or manager in
order to change the sensitivity settings of
ThruScan
, reset counters, perform installation
adjustments and to switch the unit on /off etc.
3.1 CONTROL PANEL
The control display panel provides a visual indication of the status of the unit as well as all controls
necessary for the programming and operation of the unit. The following features can be found on
the display panel.
Note that the display Panel is the same for all
ThruScan
s
ON-OFF BUTTON IRDA REMOTE CONTROL RECEIVER UPS INDICATOR
VU DISPLAY
TRAFFIC LIGHTS
INDICATOR
LCD DISPLAY
(screen)
RUN(X) SEL(
√
) UP DOWN GRAFIC ZONE LEDs (LOCATOR)
3.1.1
LCD (LIQUID CRYSTAL DISPLAY-SCREEN)
The LCD is an ongoing visual display located in the overhead Control Unit. The LCD displays the
security level settings and traffic count of both incoming and outgoing traffic. The display also
provides operational information, including program settings and adjustment information together
with fault indication and alarm displays.
3.1.2 GRAFIC (ALARM) ZONE LEDs (LOCATOR)
The display panel gives a graphical indication of the area of any alarm
activation by indicating whether the point of detection is on the right, left
or centre of the body and also whether it is at a high, middle or low level.
3.1.3 VU DISPLAY (led array)
The LED VU comprises of five green, three yellow and three red LED’s providing a
graphical indication of the level of metal detection activity occurring within the
archway. The degree of detection intensity varies depending on the quantity and
composition of the metallic object(s).
16
