NOTE: WTMD is versatile electronic equipment. Normally, it must be used indoor or to
provide a means of protection. Pls. remember protection class.
NOTE: The main supply cable for you WTMD must be insulated to prevent any short
circuit and connected to your WTMD through the appropriate window on the rain
shelter.
NOTE: Once the cable is passed through the particular hole on the rain shelter after the
drilling, isolation has to be made on that hole to prevent leakage of moisture.
NOTE: The drain hole is placed on one side of the rain shelter and it is symmetrical from
left to right. Thus the shelter should be converted from left to right depending if any
electronic connection is under this drainage hole or if there is another detector
operating in synchronisation next to it.
7.2.2 SIDE PANEL PROTECTION COVER
The “protection cover” is designed to protect the side panels from drizzled rain. It is made of plastic
material.
7.3 BATTERY GROUP
ThruScan
operates for approximately 4 hours with its standard inbuilt uninterrupted power
supply/UPS with batteries. It is possible to increase this duration upon demand optionally.
7.4 WTMD WHEELER
This device is designed as an accessory for the WTMD
ThruScan
models
to ease their transportation. (See 10.4)
7.5
CARRIAGE BAG
Carriage Bag is an option to provide an easy transportation where WTM
for an unassembled WTMD. (i.e. for ships to be unpacked for assembling in ports for the security of
the passengers)
D Wheeler can not be used
7.6 IRDA REMOTE CONTROL
(*only for
ThruScan
sX/sX-i)
This unit enables to operate and manipulate WTMD in an adequate distance by
IRDA technology. Security personal can control the unit from a distance behind a bullet-proof cabin
under threat. (see 10.3)
8. MAINTENANCE & REPAIR
8.1.
PERIODIC MAINTENANCE
Periodic maintenance requires that you inspect for loose or damaged parts and clean the surface of
the
ThruScan
‘s
exterior. The following procedure is recommended;
37
