Page 22 of 80
M8024 Issue 3.4
For use with master product
software V3.5.1.8 and above.
7.10.5. Enter the field setting using the keypad
Note:
You can’t enter a setting into a grey field. Ramp rate and Limit are factory set default
settings. But they can be changed when the field allows selection.
Use the keypad to enter the required temperature setting. Press the
button to accept the
temperature value entered.
But touching the
button, the setting entered in that field will be removed.
7.10.6.
Stir Speed.
The display is returned to the field selection screen. Continue entering field setting. For
example set the stir speed. Touch the Stir speed field.
7.10.7. As with the process for entering a temperature you may enter the stir speed using key pad.
