Electronics Line infinite prime, Руководство по установке

Страница: 81 / 113

-81-
11.2.2: On by Zone
The On by Zone feature allows you to choose two zones that activate the HA unit when
triggered. When either one of these zones is triggered, the system sends an On
command to the HA unit according to the unit’s programmed Pulse Time –
see 11.2.8:
Pulse Time . For example, you have a magnetic contact installed above the front door.
When the door is opened, the hall light is lit.
To select the sensors that activate an HA unit:
1. From the Programming menu, select HA Programming, HA Units [961].
2. Select an HA unit (01-16).
3. From the HA unit’s sub-menu, select On by Zone [#04].
4. Enter up to two zone numbers.
5. Press
when the desired setting is displayed.
11.2.3: On by Arm
The On by Arm feature activates the HA unit when the system is armed using any of the
arming methods. The amount of time the HA unit is activated is determined by the Pulse
Time –
see 11.2.8: Pulse Time . If the Pulse Time is programmed as “Toggle”, disarming
the system switches the HA unit off.
To program the On by Arm feature:
1. From the Programming menu, select HA Programming, HA Units [961].
2. Select an HA unit (01-16).
3. From the HA unit’s sub-menu, select On by Arm [#05].
4. Select Enabled or Disabled.
11.2.4: On by Alarm
On by Alarm is a feature designed for use with X10 sirens. When an alarm occurs, the
HA unit (i.e. siren) is activated for the duration of the siren cutoff –
see 7.10.3: Siren Cut-
Off . The X10 siren sounds a continuous pattern for intrusion/panic alarms and a pulsed
pattern for fire alarms.
To program the On by Alarm feature:
1. From the Programming menu, select HA Programming, HA Units [961].
2. Select an HA unit (01-16).
3. From the HA unit’s sub-menu, select On by Alarm [#06].
4. Select Enabled or Disabled.
,
If an HA unit is programmed to be activated by the On by Alarm feature, program all other
operation modes (On by Arm, Randomize, etc.) as disabled.
Do not program more than one HA unit to be activated by the On by Alarm feature. If more
than one siren is required, set all sirens with the same House and Unit code.
11.2.5: Keyfob Control
Each EL-2614/EL-2614E keyfob, offers control of up to two individual HA units. This
programming option allows you to enable or disable this feature per HA unit.
To program the keyfob control option for an HA unit:
1. From the Programming menu, select HA Programming, HA Units [961].
2. Select an HA unit (01-16).
3. From the HA unit’s sub-menu, select KF Ctrl [#07].
4. Select Enabled or Disabled.