Electronics Line infinite prime, Руководство по установке, Страница: 66 / 113

-66-
Chapter Ten: Communications
This section explains how to determine the way the control system communicates via the
GSM and PSTN modules.
10.1: Central Station Reporting
The control system supports three customer accounts for central station reporting. Each
account has its own telephone number and communications options. An explanation of
each of these options is included in this section.
10.1.1: Telephone Number
To edit an account’s telephone number:
From the Programming menu, select Communications, Accounts [951].
1. Select a CS account (1-3).
2. From the account’s sub-menu, select Phone Number [#1].
3. Enter up to 16 digits. Use the
key to enter “*”, “#”, “,” (pause), “T”
(switch to DTMF tone dialing), “P” (switch to pulse dialing) or “+”
(international code). Use the key to delete one character at a time.
4. Press when you have finished editing.
10.1.2: Account Number
To edit an account number:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account’s sub-menu, select Account Number [#2].
4. Enter up to eight digits. Enter leading zeros for account numbers of
less than eight digits. Use the key to enter hexadecimal digits.
,
If the programmed protocol is Contact ID, “A” is not a valid entry in the account number.
5. Press when you have finished editing.
10.1.3: Protocol
To program an account’s communication protocol:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account’s sub-menu, select Protocol [#3].
4. Select a protocol from the options available.
,
Account number 3 is designed for use with the Follow me feature. It is the only telephone
number that can be programmed by the user.
10.1.4: Communication Interface
For each account, you can choose whether the system employs cellular or
PSTN communication.
To program an account’s communication interface:
1. From the Programming menu, select Communications, Accounts [951].
2. Select a CS account (1-3).
3. From the account’s sub-menu, select Interface [#4].
4. Select either GSM or PSTN.