Electronics Line Commpact, Руководство по установке

Страница: 83 / 160

Hata! Burada görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n. Hata! Burada
görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n.
CommPact Installation Manual
79
12. System Initialization
The Initialization menu offers a number of options that enable you to reset the system. This menu is
particularly useful when re ‐ installing a Control System at a new site. The Initialization function
clears the entire system. This restores programming defaults, clears the log, user codes and the
transmitter register. Options are also available that enable you to clear a specific section of the
system’s memory separately.
12.1. Initialization
The Initialization function clears the entire system and resets factory defaults.
To initialize the Control System:

From the Programming menu, select Initialize, Init All [971]; the system prompts you
for confirmation.
Factory programming defaults are restored, the event log is cleared, ser codes and
wireless transmitters are deleted.
During system initialization, recorded vocal messages (Message Center and Home ID) are
not deleted.
12.2. Default Program Restore
Loading the system’s default program enables you to restore the factory ‐ set programming defaults.
To load the default program:

From the Programming menu, select Initialize, Load Defaults [972]; the system
prompts you for confirmation.
12.3. Clear User Codes
Clear User Codes deletes all programmed user codes and restores the default Master and Installer
codes.
To clear user codes:

From the Programming menu, select Initialize, Clear Users [973]; the system prompts
you for confirmation.
12.4. Clear Wireless Transmitters
The Clear Wireless Transmitters function enables you to delete all registered transmitters at once.
To clear the transmitter register:

From the Programming menu, select Initialize, Clear Wireless [974]; the system
prompts you for confirmation.