Electronics Line Commpact, Руководство по установке

Страница: 78 / 160

Hata! Burada görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n. Hata! Burada
görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n.
CommPact Installation Manual
74
10.9. Event Options for Central Station Reporting
System events are divided into a number of different event groups. This division allows you to
enable or disable reporting or Two ‐ Way Audio for a specific group of events.
The different event groups are as follows:

Burglary [#1]

Fire [#2]

Open/Close (arm/disarm) [#3]

Service [#4]

Power [#5]

Peripherals [#6]

RF Jamming [#7]

Medical [#8]
10.9.1. Event Reporting
You can enable or disable event reporting per Event Group. This allows you to filter the type of
events that are reported to the central station.
To enable/disable reporting for an event group:
1. From the Programming menu, select Communications, Event Options [955].
2. Select an Event Group.
3. From the event group’s sub ‐ menu, select Report [#1].
4. Select Enabled or Disabled.
10.9.2. Restore Reporting
For each event group, you can determine whether restore messages will be sent.
There is no Restore for No Motion event.
To enable/disable restore reporting for an event group.
1. From the Programming menu, select Communications, Event Options [955].
2. Select an event group.
3. From the event group’s sub ‐ menu, select Report Restore [#2].
4. Select Enabled or Disabled.