Electronics Line Commpact, Руководство по установке

Страница: 70 / 160

Hata! Burada görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n. Hata! Burada
görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n.
CommPact Installation Manual
66
The following programming options relate to the method in which the Remote Programmer
software connects with the system.
Callback Telephone Number
RP Callback is a security feature that helps ensure that remote programming is only performed by
authorized personnel. When the Remote Programmer contacts the Control System, the Control
System hangs up and calls the Callback telephone number.
To edit the Callback telephone number:
1. From the Programming menu, select Communications, Remote Prog., Call ‐ Back # [9521].
2. Enter up to 16 digits. Use the key to enter ʺ * ʺ , ʺ # ʺ , ʺ , ʺ (pause), ʺ T ʺ (switch to DTMF
tone dialing), ʺ P ʺ (switch to pulse dialing) or ʺ + ʺ (international code). Use the key to
delete one character at a time. Press ʹ√ʹ when you have finished editing.
If there is no Callback telephone number programmed, RP Callback is disabled and the
system connects to the Remote Programmer software using the ʺ direct call ʺ method.
RP Passcode
The RP passcode is a six ‐ digit code that grants access to remote programming. When establishing an
RP connection, the passcode programmed in the RP customer file on the PC must be identical to the
system’s RP passcode.
To edit the RP passcode:
1. From the Programming menu, select Communications, Remote Prog., RP Passcode [9522].
2. Enter six digits, and then press ʹ√ʹ .
RP Communication Interface
For remote programming, the CommPact Control System can employ GPRS, GSM, or PSTN
communication, provided that it is available in your control system configuration.
To program the RP communication interface:
1. From the Programming menu, select Communications, Remote Prog., RP Interface
[9523].
2. Select PSTN or GSM (GPRS is relevant for the WEB RP only).
RP Access Options
Options are available to enable, disable or limit access to remote programming.
To program RP Access Options:
1. From the Programming menu, select Communications, Remote Prog., RP Access [9524].
2. Select an RP access option from the following table.
Table 10-1: RP Access Options
Access
option Description
Always
Enable Up/downloading is always possible.
During
Disarm The system must be disarmed in order to establish
a connection.
Disable Up/downloading is disabled.