Electronics Line Commpact, Руководство по установке

Страница: 121 / 160

Appendix B: Transmitter Installation
CommPact Installation Manual
117
Keyfobs (EL-2711M / EL-2711P / EL-2614E and EL-2714)
The EL ‐ 2711M, EL ‐ 2711P, EL ‐ 2614E and EL ‐ 2714 are keyfob transmitters that are all supported by
the system.
Figure B- 31: EL-2711M/P Figure B- 32: EL-2714 Figure B- 33: Opening the EL-
2714’s Casing
Registration Procedure
To register keyfobs:
1. From the Programming menu, select Devices, Keyfobs [912].
2. Select the keyfob you want to register; the system initiates Registration mode.
3. Press a button, making sure that the keyfob’s LED lights up when the button is pressed.
4. Press the same button again. When Save? appears on the Control System’s LCD display,
press ʹ√ʹ .
EL-2711M
The EL ‐ 2711M is a one ‐ button transmitter that generates a Medical alarm when pressed. The
transmitter is water resistant and can be worn around the neck. Its large button makes it ideal for
elderly or sight ‐ impaired users.
When the battery is low, the EL ‐ 2711M’s LED flashes during transmission and a Low Battery signal is
sent to the receiver. When either of these two indications is observed, replace the unit.
EL ‐ 2711M complies with EN ‐ 50131 Grade 2 Class II Power Supply Type C.
EL-2711P
The EL ‐ 2711P is a one ‐ button transmitter that generates a Panic alarm when pressed. The
transmitter is water resistant and can be worn around the neck. Its large button makes it ideal for
elderly or sight ‐ impaired users.
When the battery is low, the EL ‐ 2711P’s LED flashes during transmission and a Low Battery signal is
sent to the receiver. When either of these two indications is observed, replace the unit.
EL ‐ 2711P complies with EN ‐ 50131 Grade 2 Class II Power Supply Type C.