Electronics Line Commpact, Руководство по установке

Страница: 20 / 160

Hata! Burada görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n. Hata! Burada
görünmesini istedi ğ iniz metne Heading 1 uygulamak için Giri ş sekmesini kullan ı n.
CommPact Installation Manual
16
PART ARMING INST
The system is in the process of arming with the Instant arm feature activated.
PERIM ARMING INST
Table 3-5: System Status
Item Description
ZONES IN ALARM Zones have been violated.
TAMPER ALARM The system has been tampered with.
56 TO EXIT The exit delay is counting down (56 seconds remaining).
11 TO DISARM The entry delay is counting down (11 seconds remaining).
SYSTEM NOT READY The system is not ready to arm, check that all doors and windows are closed.
KEYPAD LOCKED Five unsuccessful attempts were made to enter a user code; the keypad is locked
for 30 minutes.
SYSTEM TROUBLE A trouble condition has been detected, press

for further details.
3.5. Audible Notification
The following table is a summary of tones that audibly notify system status.
Table 3-6: Audible Notification
Status Tones Description
Positive
Acknowledge 1 long tone. The preceding action was accepted.
Negative
Acknowledge 5 low tones. The preceding action was not accepted (e.g. an
incorrect user code entry).
Exit Delay/
Entry Delay External Siren: 4 tones.
Built-in Siren: 4 tones or
Continuous tones.
Continuous tones quicken
when there are 15 seconds
remaining and quicken
again when there are 5
seconds remaining.
The exit/entry delay is counting down.
The number of tones sounded during each delay is
determined in programming – see
The number of tones sounded during each delay is –
see p. 508.5 Arming Tones.
Chime 2-tone modulated sequence
(similar to a doorbell). A zone with the Chime option enabled has been
opened – see p. 43 7.3.5 Chime .
Arm 3-tone modulated sequence
(low to high) sounded twice The system has been armed using any of the arming
methods.
Disarm 3-tone modulated sequence
(high to low). The system has been disarmed.
System Trouble 4 rapid tones sounded once
per minute. A trouble condition has been detected, press

for
further details. For Fire Trouble Tones, there is a
programmable option to repeat fire-related trouble tones
until the problem has been taken care of – see p. 51,
8.6.3 Fire Trouble Tones.
3.5.1. System Trouble Tones
In the event of system trouble, the CommPact Control System sounds a series of tones to alert the
user. To silence these tones, press

and scroll through the system trouble list displayed on the
LCD. When the trouble condition is restored, it is removed from the system trouble list.