Program manual
Euro-2500T
© Elcom Ltd.
46
3.12
Euro
currency programming
The ECR Euro-2500T allows you to use
Euro
currency. According to the stage of Euro currency implemen-
tation it is possible to account in a national currency too (stage No. 1. and 2.) or in a foreign currency (stage
No. 3).
Accounting with
Euro
currency is divided into four stages:
3.12.1 Stage without
Euro
currency
The ECR works without
Euro
.
3.12.2 1st stage of
Euro
currency
The basic currency is a national one, the supplementary one is
Euro
.
The customer can pay either in a national currency or in
Euro
.
Programming the first stage of
Euro
currency.
Set the cash register to P mode by pressing button 4 and button Mode and press the following keytops:
2
0
0
1
currency name
EUR rate
currency flag
Currency name: the abbreviation of the national currency (up to 3 characters)
EUR rate
:
the actual
Euro
currency rate to the national currency entered to max. 11 digits.
max rate is 10 000
min. rate is 0,0001.
Currency flag:
1st digit - the number of decimal places to which the amount of EUR is displayed
2nd digit - the number of decimal places to which the amount of EUR is rounded
Afterwards the information on conversion for the first stage of
Euro
currency is displayed. The same
information is also printed out.
During the first stage the current EUR rate can be set in the programming mode in the following way:
current rate
Note:
The return to the stage without
Euro
currency is not possible without ECR master reset. For this,
it is necessary to call your service technician.
3.12.3 2nd stage of
Euro
currency
The basic currency is
Euro
, the supplementary one is
a national
.
The customer can pay either in a national currency or in
Euro
.
Programming the second stage of
Euro
currency.
Set the cash register to P mode by pressing button 4 and button Mode and press the following
keytops:
2
0
0
2
EUR rate
EUR rate:
the same as in stage No. 1.
$
