64
Registration mode
Euro-2500T
© Elcom Ltd.
4.7 Corrections
4.7.1 Clearing
Example: Has an incorrect price been entered or printed? In the following example a price of 1230 was
entered by mistake instead of the correct price of 1290.
4.7.2 Voids
Note: The void function is used to correct items entered in one unfinished purchase.
A : Correction of the last entry (direct void)
Example: The previous printed line was registered incorrectly and it is necessary to make a correction. If
a mistake is made in an incorrect department, PLU, percentage, deduction or other entry, void this
incorrect entry by pressing the
(VOID) key immediately after the incorrect entry. In the following
example the price 12,50Sk was incorrectly entered instead of 13,50Sk.
Step No. Key operation
1.
1230
2.
1290
Print:
DPT 2
I
1x12.90 =12.90
B. PC ON-LINE mode: The data is transmitted from ECR to PC.
The cash register software allows the use of the Euro-2500T ON-LINE information source for PC. This
allows transmission of the sales data to PC for processing. It allows the preparation of the Invoice or
delivery note by the PC according to information from the ECR.
PC ON-LINE mode setting:
If the ECR is in R or T mode, press the key
.
Afterwards the cash register is ready to communicate
with a PC (PC ON-LINE mode). The cash register transmits information on the PLU sale, PLU refund,
purchase finishing signal and the information on type and amount of payment. The text PC is displayed
on the left side of the display.
Please wait a moment for the cash register response in the event of switching to another key mode (L, X,
Z, P) where the PC-ON LINE mode is automatically switched off. Returning to mode R or T, the PC ON-
LINE mode is automatically switched on again. The PC-ON LINE mode is switched off by pressing the key
in R or T mode. The switching off is confirmed by a beep. The text PC is not displayed.
Note 1:
By switching the ECR off and on, the ECR is ready for standard registration.
Note 2
: The data transmission direction for the PC ON-LINE mode is set by the 5th system flag - digit 5=1).
PC-ON LINE mode is switched off by pressing the key
in R or T mode. The switching off is
confirmed by a beep. The text PC is not displayed.
Note 1:
Switching the ECR off and on prepares the ECR for standard registration.
Note 2:
PLU report amounts (in the concrete PLU No. 2400) are not correct in PC ON-LINE mode.
Note 3
: The data transmission direction for PC ON-LINE mode is set by the 5th system flag - digit 5=0).