© Elcom Ltd.
Euro-2500T
Program manual
43
3.11.5 Programming of PLU bar codes
There are
two methods
of PLU bar code programming :
1. Programming by means of the keyboard - the numeric digits of the bar code are entered
manually from the cash register keyboard
2. Reading of the bar codes from the package of the goods with the bar code scanner.
The cash register enables the users to adopt both methods of programming (by entering the bar code either
of these methods is understood).
Programming procedure:
Enter the bar code of the goods and press the
button. After pressing the
button, the cash
register verifies whether the entered bar code is not assigned to any other PLU. If there is a duplicate PLU,
the information will appear on the display.
By pressing the
(CLEAR) button the register is returned to programming the PLU code of the item
originally desired.
If the entered code has not been assigned to any other PLU, the register continues programming the next
PLU. To exit the programming mode press the
button. After pressing it, the register starts to sort
the bar codes signaled on the display. The sorting time depends on the number of programmed bar codes.
After sorting the register returns to the basic programming mode P MODE.
Note 1: If you switch off the register during the sorting, you can continue sorting by switching the regis-
ter back on.
Note 2: To ensure reliable functioning of bar code scanning, it is important to program the scanner cor-
rectly and connect it properly to the cash register.
Parameters of setting the bar code scanner:
number of data bits - 8
parity
- none
stop bit
- 1
transmission speed - according to setting of the fifth register system flag
end character
- according to setting of the fifth register system flag
Display:
The PLU No. 1 bar code programming.
00001.PLU BAR CODE
8586001760034
Display:
Display information on duplicate code.
DUPLICATE CODE
8586001760034
Display information on bar code sorting.
Display:
BAR CODE SORTING
PLEASE WAIT
