Program manual
Euro-2500T
© Elcom Ltd.
38
Note:
The Cash register Euro-2500T allows you to set up eight sales units that can be assigned to
each PLU. The following table shows the default setting that can be modified by the described
programming.
Unit No. Name
1
2 PCS
3 kg
4 l
Unit No. Name
5 m
6 m2
7 btl
8 pkg
Display:
The programming of the second sales unit.
2. sales unit
pcs
3.10 Sales unit programming
A sales unit can be assigned to each PLU. It is possible to program 8 sales units, each up to 3 characters.
Use the hexadecimal and alphabetical table for programming.
3.10.1 Sales units programming
Set the cash register to P mode by pressing button 4 and button Mode and press the keytop
. The
number of the sales unit will appear in the first line of the display and the name of the sales unit in the
second line. Enter hexadecimal codes for the name of a new sales unit and press
. Afterwards the
ECR is ready to program the next sales unit. If you make a mistake, press the keytop
(Clear)
and the
previous character is deleted and you can correct it. The sales unit can be ended anytime by pressing the
keytop
.
Programming procedure:
Hexadecimal codes
Programming of the next sales unit
Skip the programming
From the 1st sales unit
Sales unit number
..
1 2
,
..
