Program manual
Euro-2500T
© Elcom Ltd.
32
3.7 Function texts programming
Up to 17 characters for function texts can be used. Use the hexadecimal and alphabetical character table.
Use the same procedure used for programming of the receipt logo.
3.7.1 Function texts programming
Set the cash register to P mode by pressing button 4 and button Mode and press the key
. The number
of the text in the first line and programmed text in the second line will appear on the display. Enter the new
text by using hexadecimal codes and press the key
. The Cash register is now ready to program
the next function text. If you make a mistake during the programming, correct the previous characters by
pressing
(CLEAR) key. Finish the function text programming by pressing the
button.
3.6.4 Correction of Cashier
Set the cash register to P mode by pressing button 4 and button Mode. Enter the cashier number or the text
number to be corrected and press the
button. Continue in the same way when programming other
cashiers.
3.6.5 Printing of Cashier values
To check the correctness of programmed names and texts, press the
button in the text-programming
mode. If in the programming mode, press the
button first and the
button. Print the particular
preprogrammed cashier by pressing the
button.
Note: It is impossible to cancel the access authority of Cash-
ier No. 1 to P mode.
Display:
The Cashier Authorization programming
1.cashier ACCESS
1111
Cashier access code
Digit
Access to
X
mode
1 0 - no
1 - yes
Access to
Z
mode
2 0 - no
1 - yes
Access to
P
mode
3 0 - no
1 - yes
Access to
T
mode
4 0 - no
1 - yes
Access authority
1111
