11
starting address is set.
Hold If No DMX
With this function, when the drive is not DMX signal, it runs automatism, close, hold and
music, the default is hold.
Pan Reverse
With this function you can reverse the Pan-movement.
Tilt Reverse
With this function you can reverse the Tilt-movement.
Feedback
With this function, you can feedback switch of pan movement or tilt movement.
Movement Speed
With this function, you can select scan mode from 1 to 4.
Mic Sensitivity
With this function, the default is 70%, you can select the desired microphone sensitivity
from 0 % to 99 %.
Display Setting
Shut off time
With this function you can shut off the LCD display after 2 to 59 minutes. Turn the encoder
in order to select the desired shut off time.
Initial Effect
With this function, Display initial effect position.
Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
Effect Adjust
Calibrate values
With this function, you can calibrate and adjust the effect wheels to their correct positions.
The password of calibrate values is 050.
Reset-functions
With this function you can reset the device via the Control Board. You can select the
different reset functions by turning the encoder.
