10
Information
Time information
Current Time
With this function, you can display the temporary running time of the device from the last
power on. The display shows “XXXX”, “XXXX” stands for the number of hours. The counter
is resetted after turning the device off.
Total Run Time
With this function, you can display the running time of the device. The display shows
“XXXX”, “XXXX” stands for the number of hours.
Clear Total Time
With this function, you can clear total run time of the fixture. The display shows “ON” or
“OFF”, Press “Enter” to confirm.
Software version
With this function, you can display the software version of the device.
• Select
“Software version”
by turning the encoder.
• Press the encoder, the display shows
“V-X.X”
, “X.X” stands for the version number, e.g.
“V-1.3”
• Turn the encoder in order to read the version of every individual IC.
• Press the Mode/Esc-button in order to return to the main menu.
PERSONALITY
Status Settings
Address Via DMX
With this function, you can adjust the desired DMX-address via an external controller.
• Select “Address via DMX” by turning the encoder.
• Press the encoder, the display shows “ON” or “OFF”.
• Turn the encoder to select “ON” if you wish to enable this function or “OFF” if you don’t.
• Press the encoder to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
• On the controller, set the DMX-value of channel 1 to "7".
• Set the DMX-value of channel 2 to "7"or "8". When set to "7" you can adjust the starting
address between 1 and 255. When set to "8" you can adjust the starting address between
256 and 511.
• Set the DMX-value of channel 3 to the desired starting address. If you want to set the
starting address to 57, set channel 1 to "7", channel 2 to "7" and channel 3 to "57". If you
want to set the starting address to 420,set channel 1 to "7", channel 2 to "8" and channel
3 to "164" (256+164=420).
• Wait for approx. 20 seconds and the unit will carry out a reset. After that, the new
