manualshive.com logo in svg

EFD Ultra 325TT, Руководство пользователя, Страница: 55 / 79

Поделиться
Скачать
EFD Ultra 325TT Скачать руководство пользователя страница 55

7.2

LOADING A PROGRAM

After the power-up sequence, the LCD will display the
RUN screen of the program last executed. 

To load a new program, press “LOAD”.  This will open
the program LOAD screen. 

Scroll through the program list until the desired
program is displayed and press “DONE”. 

Scrolling is accomplished with the rotary knob
located on the front panel.  Only previously
downloaded programs will be displayed, i.e. if only
four programs are downloaded onto the system, then
only four programs will be displayed and scrollable in
the list.

7.3

RUNNING A PROGRAM

Once a program has been selected and loaded, the
LCD will display the RUN screen for that program.
The RUN screen displays:

• Program Number

• Program Name

• (3) User defined comments

9

• Run count, and

• The cycle time it took to complete the last run of

the program.    

To run a program, press the button located beneath word “RUN”.

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

55

9

The first three lines of the program are reserved for user comments. At this time, these comment lines are not accessible to the user.

Содержание Ultra 325TT
















































































Отзывы:

Нет отзывов