EFD Ultra 325TT Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 79

EFD Ultra 325TT Скачать руководство пользователя страница 51

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

6.5

COPYING A PROGRAM (SAVE AS)

To copy an existing program, simply save the current program under
a new name. This creates an exact copy with a different name.

Tap on “Save As” from the Program drop-down menu. The name of
the program currently opened will be displayed and highlighted in the
“Save As” edit field. This facilitates name changing when the new
name will be similar to the existing program. Note that program
names are case-sensitive.

Once the program has been copied
(save as), you will be in the new
program that you just saved.

51

6.6

INSERTING/DELETING POINTS IN A PROGRAM

Points are inserted at the current point where the instruction is inserted. This means if you have
point #5 highlighted in the Program edit window and select “Insert”, you will insert a new
command at that point. The current point #5 will become point #6.

To delete a point in a program, you must highlight the point and tap “Delete”. This will delete the
current point and move all subsequent points up by one position.

It is important to note that when editing CP points, the line type “Edit” button can only be viewed
from the CP Start point. To edit the line parameter for a continuous path, you must go to the CP
Start Point and tap “Edit”.

«
...
49
50
51
52
53
...
»

Содержание Ultra 325TT
















































































Отзывы:

Нет отзывов