®
A NORDSON COMPANY
Ultra TT User's Guide
Version 1.2
4.4
PARK LOCATION
The park location is the position you want the dispense tip to move to after it has completed its
taught program. This location is often a position closer to the work-piece than mechanical home
in order to shorten the work cycle and also allows ample space for the part to be removed from
the fixture plate.
The default park location is set to mechanical home position which is
X=0,Y=0, Z=0. This is indicated in the drop-down box as Home.
To teach a new park location, first select “New”. Enter the new Park
Location name. Next, teach the location by tapping “Jog” and moving
the dispense tip to desired location. Tap “OK” to return to Park
Location setup screen. Tap “Teach” to complete the new Park
Location setup.
To use the toggle bracket at park location, check the “Use Toggle”
box. This will actuate the toggle bracket i.e. toggle down, at that park
location, otherwise, the toggle bracket will toggle up at the part location. Teach the park location
as above.
Maximum number of locations is ten. Note locations include park, purge and purge toggle.
4.5 PURGE VALVE #1
To teach a new purge location:
1. Select “New”. Enter the new Purge Location name.
2. Teach the location by tapping “Jog” and moving the
dispense tip to desired location. Tap “OK” to return
to Purge Location setup screen.
3. Enter the desired purge time (in seconds). Note that the
purge time is limited to a maximum of 65.535 seconds.
4. Tap “Teach” to complete the new Purge Location setup.
5. The selected purge routine is downloaded the next time
a download from the PDA occurs. Once downloaded onto the
machine, the purge routine can be accessed through the front
panel LCD in program 99.
34