manualshive.com logo in svg

EFD Ultra 325TT, Руководство пользователя, Страница: 49 / 79

Поделиться
Скачать
EFD Ultra 325TT Скачать руководство пользователя страница 49

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

49

6

OPERATIONAL FEATURES

6.1

DOWNLOADING A PROGRAM

Once the program has been taught, it must be downloaded to the machine before it can be run.
There are two ways to download a program.

A.  At the Program screen, select Download from the

Program drop-down menu.  This will download the
current program into the machine memory without
running and may take several seconds.

B.  From the main Program screen, tap “Run”. In the Run

window, tap “Run”.  The program will be automatically
downloaded before it runs.

Once the program has been downloaded to the System, it can
be selected from the front panel as described in Section 7
(Interactive LCD Panel) of this guide.

6.2

RUNNING A PROGRAM

Once a program has been downloaded to the Ultra TT System, it can
now be run with or without the Palm handheld attached to the
System.

A. With the Palm handheld: 

To run the machine with the Palm handheld attached, tap “Run” in
the Program screen. This will bring you to the Run window. Tap the
“Run” button. This will cycle through the taught program.

B. From the front panel:

After loading the program into the Ultra TT System,
press the soft key corresponding to RUN on the LCD.

Содержание Ultra 325TT
















































































Отзывы:

Нет отзывов