manualshive.com logo in svg

EFD Ultra 325TT, Руководство пользователя, Страница: 27 / 79

Поделиться
Скачать
EFD Ultra 325TT Скачать руководство пользователя страница 27

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

27

important notes

Recharge PDA and sync it to your computer at the end of every day. Otherwise, you may lose the
information entered since your last sync session.

The next time you want to connect to the Ultra TT using the same PDA, launch the EFD Ultra TT
PDA application. When asked if you wish to reconnect to the last device you communicated with,
select “Yes” and go through the reinitialization steps.

If you are using a new PDA or a different PDA from the one last used/paired with the Ultra TT, you
must perform the discovery and pairing procedure on the new PDA with the Socket Adapter
installed on the Ultra TT.

If the PDA ever gets out of range of the Ultra TT (approx. 30 ft.), Communications Erroe #1104 will
occur. The Bluetooth connection will be reestablished automatically when the PDA comes back
into range.

If the PDA powers down; it may be able to reconnect without restarting the Ultra TT and the EFD
Ultra TT PDA application by waiting 8-10 seconds. In this case, the Bluetooth Reconnect window
will pop-up and communication will be established. If the reconnect window does not pop-up,
restart the application by returning to PDA Home and relaunching the EFD Ultra TT PDAA
application.

Содержание Ultra 325TT
















































































Отзывы:

Нет отзывов