manualshive.com logo in svg

EFD Ultra 325TT, Руководство пользователя, Страница: 52 / 79

Поделиться
Скачать
EFD Ultra 325TT Скачать руководство пользователя страница 52

®

A NORDSON COMPANY

Ultra TT User's Guide

Version 1.2

52

6.7

CHANGING PROGRAM ID NUMBER

From time to time, you may need to reassign a program ID number.
To do this, select Program ID in Edit drop-down menu.  This will open
the Change Program ID window.

The Change Program ID window displays
the current program ID number and the
closest open available ID number.  You
can enter the desired ID number or use
the default number provided.

6.8

CHANGING PROGRAM ORIGIN

You can change the program origin anytime: 

• Tap the top left-hand corner of the Program screen.

• From the “Edit” drop-down menu, select “Program Origin”.

• Tap “Go To” to check the position of the current program origin

• Jog to the new program origin position

• Tap “Teach” to confirm

Note:

Before confirming/changing program origin, the toggle valve
will toggle up if it is in the down position.

WARNING!

Do not tap “Teach” when Z is at zero position. Tapping “Teach” at

zero position will erase all Z coordinates in the program and they cannot be

recovered. You will then have to manually re-enter each line of the program.

Содержание Ultra 325TT
















































































Отзывы:

Нет отзывов