Edirol RG-100 Скачать руководство пользователя страница 85

Страница: 85 / 128

Using the Scheduler

Drag-and-drop the selected palette to the track in the SCHEDULE EDITOR

area.

fig.scheduler04.eps

You can drag-and-drop the palette to any starting point (you can adjust the time by
minutes).

There are 10 schedule tracks (SCHEDULE 1 – 10) in the area, so you can drag-and-
drop the palette to any of them.

The left end of the palette is the starting point of the playback time.

Set the playback mode of the palette.

When you click the palette you drag-and-dropped to the SCHEDULE EDITOR area,
and click [INFO], the SCHEDULE INFORMATION window appears, where you can
edit the items as necessary.

fig.schedule info01.eps

• You can turn on/off the movies by clicking on the box on the left side next to the

movie name. When the box is lit in orange, it is turned on.

• You can check the movie length on the right side next to the movie name.

• You can turn on/off the loop play by clicking the MOVIE LOOP icon. When the

icon is lit in orange, loop play is turned on. In this state, the palette repeats
playback.

• If you click [OK], the former display reappears. If you click [CANCEL], the

operation is cancelled, and the window disappears.

Repeat Steps 1 – 3 as necessary to program other schedules.

Starting time of playback

[INFO]

Palette

SCHEDULES 1-10

Movie length

Movie name

On/off

[OK]

[CANCEL]

MOVIE LOOP

000RG-100.book 85 ページ２００４年８月６日　金曜日　午後５時３７分

Содержание RG-100

































































































































Результаты поиска

Содержание RG-100

Отзывы:

Похожие инструкции для RG-100

Бренды по названию

Популярные бренды

Edirol RG-100, Руководство пользователя

Результаты поиска

Содержание RG-100

Отзывы:

Похожие инструкции для RG-100

Бренды по названию

Популярные бренды