168
Various Settings
ACC security involves using Memory Stick
security to record a security code, and then
when the ignition switch is turned to OFF and
back to ACC, the operation of all buttons is
disabled.
The ACC security function will be
activated. Press the [FUNC] button
and button [5] simultaneously for two
seconds or more again to cancel the
ACC security function.
ATTENTION
• If the vehicle's battery is
disconnected at times such as
during servicing, ACC security will
be cancelled.
• When ignition switch is turned
OFF and back to ACC, the
operation all button is disabled. If
this happen, resume normal
operation. (Refer to "How to
resume normal operation (ESN
security lock out)" on page 166.)
Once ESN security is activated, the indicator
flashes whenever the vehicle's ignition switch is
turned off, warning potential thieves that the
unit is protected. However, if do not want this
visible deterrent, it may be turned off.
[IND. FLASH] means the security
indicator will flash when the vehicle's
ignition switch is off, and [IND.-----]
means it will not. Repeat the above
steps to reactivate the flash mode.
[ESN] appears on the display,
followed by an eight-digit number;
this number is your electronic serial
number (ESN). You may use this
number to identify your Eclipse
CD8445E in the event of theft
recovery.
How to operate the ACC
security
1
Check that the unit is in standby.
2
Once a security code has been
recorded, press the [FUNC]
button and button [5]
simultaneously for more than two
seconds.
How to turn the security
indicator on/off
1
With the unit in standby, press the
[FUNC] button, then button [2]
and hold both for more than one
second.
2
[IND. FLASH] or [IND.-----]
appears on the display.
How to read the Electronic
Serial Number
1
Check that the unit is in standby.
2
Press and hold the [FUNC]
button, then button [4], and hold
both for more than one second.