Eclipse CD 8445E Скачать руководство пользователя страница 19

Страница: 19 / 101

How to operate the CD player

131

The front panel opens.
If a disc has already been loaded,
the disc is ejected by pressing the
[CD ]

button.

The CD will immediately start
playing.

ATTENTION

When a CD is already loaded, press the
[DISC MS] button to switch to the CD
mode.

The front panel closes.

First press the [DISC MS] button for less than
one second to switch to the disc mode. It is
assumed here that a CD has already been
loaded into the unit.

This starts CD play.
Disc mode will switch from CD player

➔

Memory Stick player in order each

time the button is pressed.
If an external CD changer is
connected, each additional press of
the [DISC MS] button will switch
modes from CD player

➔

changer 1

➔

CD changer 2

➔

Memory Stick player

➔

CD player.

A changer or player with no discs
loaded will be skipped.

ATTENTION

• Playback may be intermittent

when there is a scratch on a CD or
when the recorded side is dirty.

• Only two external CD changers

may be connected.

Turn to the right:

Advances to the next track.

Turn to the left:

Returns to the beginning of the track
being played. (Repeat turning for
previous tracks.)

Listening to CD

Press the [CD

] button for less

than one second.

Insert a CD into the disc slot,
label side up.

CAUTION

Do not press the

[

]

button while CD is

being inserted. This could cause an injury
and damage to the front panel.

Press the [CD

] button for less

than one second.

Switching to the CD player
mode

Press the [DISC MS] button for
less than one second to switch to
the CD player mode.

Advancing to the next track
or returning to the beginning
of the track being played

Turn the [SEL] button to the left or
right.

Содержание CD 8445E






































































































Результаты поиска

Содержание CD 8445E

Отзывы:

Бренды по названию

Популярные бренды

Eclipse CD 8445E, Руководство пользователя

Результаты поиска

Содержание CD 8445E

Отзывы:

Бренды по названию

Популярные бренды