manualshive.com logo in svg

Eclipse CD 8445E, Руководство пользователя

Поделиться
Скачать
Eclipse CD 8445E Скачать руководство пользователя страница 24

„

 136 

„

Operation

How to operate the MP3/WMA player

ATTENTION

The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos
and live performances without permission from the copyright holder for uses other than personal
enjoyment is prohibited.

What is MP3/WMA?

MP3 (MPEG Audio Layer III) is a standard format for audio compression technology. By using MP3
a file can be compressed to one-tenth the size of the original.
WMA (Windows Media

TM

 Audio) is format for audio compression technology. WMA files can be

compressed to a size smaller than MP3 files.
This deck has limitations on MP3/WMA file standards and recorded media and formats that can be
used.

Playable MP3 file standards

• Supported standards:MPEG-1 Audio Layer III
• Supported sampling frequencies:  44.1, 48 (kHz)
• Supported bit rate: 64, 80, 96, 112, 128, 160, 192, 224, 256, 288, 320 (kbps)

* Supports VBR. (64~320kbps)
* Does not support free format.

• Supported channel modes: stereo

Playable WMA file standards

• Supported standards: WMA Ver. 7

WMA Ver. 8
WMA Ver. 9

• Supported sampling frequencies:  32, 44.1, 48 (kHz)
• Supported bit rate: 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)

*Supports VBR (48~192 kbps).
*Does not support lossless compression.
*Does not support WMA files recorded at a frequency of 48kHz with a bit rate
 of 48kbps.

ID3/WMA tags

MP3/WMA files have an "ID3/WMA Tag" that allows input of information so that data such as song
title and artist can be saved.
This deck supports ID3v. 1.0, 1.1 and WMA tags.

About MP3/WMA

Содержание CD 8445E






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды