ESN security operating procedure
165
Enter a four-digit security code using
digits 0 to 9, A to F. The number
(shown on the display) changes in
ascending order between 0 and 9, A
and F each time the button is
pressed. Each button number (1 to 4)
corresponds to each digit (first to
fourth) of the security code.
If a security code is entered and the
deck verifies that it is correct,
[CANCEL] will appear on the display
and the security function will be
cancelled.
ATTENTION
If the security code that is entered does
not match the code that is recorded by
the deck, [ERR] will appear on the display
for two seconds and operation will
continue as normal without the security
function being cancelled.
Cancelling the security function
using a Memory Stick
A [SEC] message appears, then in
two seconds it will change to [- - - -]
(Security code input display).
A [MS] message will appear.
ATTENTION
If a Memory Stick has already been
inserted, a [MS EJECT] message
appears. In this case, eject the Memory
Stick and insert again. (Refer to "Ejecting
the Memory Stick" on page 147 for details
on ejection of the Memory Stick.)
The recorded data will be read from
the Memory Stick.
The security function will be
cancelled.
ATTENTION
• If a reading error occurs or if an
incorrect Memory Stick is inserted,
[ERR] will appear on the display
for two seconds, and then the
display will change to [EJECT]. If
this happens, eject the Memory
Stick and try again.
• Security setting cannot be
cancelled by this procedure if the
Memory Stick containing the
security code is formatted.
Refer to "Ejecting the Memory Stick"
on page 94.
3
A security code is entered by
pressing the buttons [1] to [4].
4
Press the [FUNC] button for
longer than one second.
1
Check that the unit is in standby.
2
Press and hold button [1], then
the [FUNC] button, and hold both
for more than one second.
3
Press the [DISC MS] button.
4
Insert the Memory Stick and close
the front panel.
5
If the contents recorded in the
Memory Stick match the
information recorded by the deck,
[CANCEL] will appear on the
display.
6
Eject the Memory Stick.
IX