Eclipse CD 8445E Скачать руководство пользователя страница 21

Страница: 21 / 101

How to operate the CD player

133

A CD title may be created, attached and
displayed for your discs. If external CD
changers are connected, a title for a CD will be
created in the same way. It is assumed here
that the CD to be titled is playing.

ATTENTION

No CD text disc can be set.

The function mode is activated.

The selected item will be highlighted.

The disc title setting mode is
activated.

Pressing the button will switch types
from [ABC] (Upper-case alphabet
characters) to, [123] (numeric
characters) and then [!&?] (symbols).

The character will be inserted where
the cursor is flashing:
[SEL] button:

Moves the cursor to the right.

[ ] button:

Deletes one character to the left.
While the [ ] button is held down,
the cursor moves to the left.

Turn to the right:

Advances the character forward in
its type.

Turn to the left:

Moves the character backward in its
type.

[Upper-case alphabet characters] Initial
value [A] [Right direction]

➔

www

➔

www

[Numeric characters] Initial value [1]
[Right direction]

➔

www

➔

www

[Symbol] Initial value [!]
[Right direction]

➔

’

➔

(

➔

)

➔

;

➔

www

ATTENTION

• To change the type of character to

be entered, repeat steps 3 and 4.

• A maximum of 12 characters may

be entered per title.

• 30 titles can be stored.
• If the number of discs that can be

memorized is exceeded, the
information about the disc whose
playing time is oldest is deleted.

At this time, other adjustments can
also be made in function mode.

Creating a title for a CD

Press the [FUNC] button for less
than one second while in the disc
mode.

Turn the [SEL] button to select
Title.

Press the [SEL] button.

Press the [

] button to select the

character type.

Press either [SEL] or [

] button

to select the position in which to
enter the character.

Turn the [SEL] button to the left or
right to select characters.

Press the [SEL] button to select
characters.

Press the [RTN] button.

Press the [FUNC] or [RTN] button
to exit function mode.

Содержание CD 8445E






































































































Результаты поиска

Содержание CD 8445E

Отзывы:

Бренды по названию

Популярные бренды

Eclipse CD 8445E, Руководство пользователя

Результаты поиска

Содержание CD 8445E

Отзывы:

Бренды по названию

Популярные бренды