manualshive.com logo in svg

Eclipse CD 8445E, Руководство пользователя

Поделиться
Скачать
Eclipse CD 8445E Скачать руководство пользователя страница 26

„

 138 

„

Operation

File names

Only files with the MP3/WMA file extension ".mp3", ".wma" can be recognised as MP3/WMA and played.
Be sure to save MP3 files with the ".mp3" file extension. Be sure to WMA files with the ".wma" file
extension. The "MP" or "WMA" letters of the file extension will be recognised whether entered as
uppercase letters or lowercase letters.

Multi-sessions

Multi-sessions are supported, and playing of CD-R and CD-RW discs with annotated MP3/WMA
files is possible. However, when "Track at once" has been written, close the session or process the
warning message. Standardise the format of each session without changing the format.

Playing MP3/WMA

When a disc with recorded MP3/WMA files is inserted, the deck first checks all the files on the disc. No sound is
output while the deck is checking the files on the disc. It is recommended that the disc be recorded without files
other than MP3/WMA files and without unnecessary folders in order to speed up the checking of disc files by
the deck.

MP3/WMA playing time display

It is possible that playing time will not be correct, depending on the writing condition of the MP3/
WMA file.
*It is possible that playing time will not be correct when VBR Fast Up/Down is operated.

Display order of MP3/WMA file/folder names

Names of MP3/WMA folders and files within the same level are displayed in the following order.
1.MP3/WMA folders displayed first, by ascending order of numbers, letters.
2.Files displayed next, by ascending order of numbers, letters.

CAUTION

If the ".mp3", ".wma" file extension is attached to a file other than an MP3/WMA file, that file will be
mistakenly recognised by the deck as an MP3/WMA file and played, resulting in loud noise output
that can damage the speakers. Be sure to avoid attaching the ".mp3", ".wma" file extension to files
that are not MP3/WMA files.

Содержание CD 8445E






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды