ESN security operating procedure
161
You can switch the type of security being used
(Key CD security or Memory Stick security).
The initial setting is for Key CD security to be
used.
Security type will switch from Key CD
security (DISC SEC)
↔
Memory
Stick security (MS SEC) in order
each time the button is pressed.
ATTENTION
If a security is activated, switching the
security type is not available.
How to program the Key CD
A [SEC] message appears, in two
seconds it will change to [DISC].
ATTENTION
• If a CD has already been inserted,
a [SEC] message appears, and
then the front panel opens and the
CD is ejected.
• If a security is activated,
programming the Key CD is not
available.
The front panel opens; The
CD8445E is now ready for your Key
CD in the CD slot.
A [SEC] message appears, then the
Key CD is ejected.
The front panel closes.
ATTENTION
• If there is a problem with the
inserted CD, an [ERR] message
will appear for two seconds and
the CD will be ejected. Reinsert
the ejected CD.
• If a CD causes the [ERR] message
to appear twice in a row, a
[CHANGE] message will appear
for two seconds. Try another CD.
• Copy Protected CD and MP3/WMA
CD-ROM cannot be programmed for
Key CD security.
• The Security indicator will flash
whenever the vehicle's ignition is
switched off.
How to switch the security
type (Key CD security/
Memory Stick security)
1
Check that the unit is in standby.
2
Press and hold the [FUNC]
button, then button [3], and hold
both for the more than two
seconds.
How to operate the ESN (Key
CD) security
1
Check that the unit is in standby.
2
Press and hold the [FUNC]
button, then button [6], and hold
both for more than one second.
3
Press the [CD
] button.
4
Insert the CD into the slot.
5
Press the [CD
] button.
IX
