ECKELMANN UA 300 D, Руководство пользователя

Страница: 49 / 108

Operation of UA 300 D
43
E
2007 − ECKELMANN | BERLINER STRASSE 161 | 65205 WIESBADEN | FON +49(0)611 7103-0 | FAX 49(0)611 7103-133 | eckelmann.de
Version 2.03 27. Juni 2008
Operating screens
An operating screen shows values for output and/or input. There may be more values for output and/or input
than fit into the display at one time. The cursor keys can be used to scroll through these additional values. The
screen may also contain more than one page, in which case the pages can be viewed one at a time.
Arrows appear on the right of the display to indicate whether you can scroll or page through a menu
or screen.
Scrolling
Use the up and down cursor keys (
↑
) and (
↓
) to:
- Scroll line by line, for example when selecting a variable in a line from a list of predefined variables.
- Scroll block by block to view values that extend beyond the capacity of the display.
Paging
The left and right cursor keys (
←
) and (
→
) can be used to page through screens containing more than one
page. If a menu contains more than three submenus, the remaining items can be viewed by scrolling with the
up and down cursor keys (
↑
) and (
↓
).
Cancelling entry block
Before any values can be entered, the entry block must be deactivated as follows:
- In the Main Menu choose item 9 Parameter Setting.
- Then choose item 3 Block.
- Press ENTER (
↵
) to set the check mark (
√
). When the check mark is set, entry block is deactivated, allo-
wing settings to be entered.
- Press ESC to exit the screen.
Blocking is activated automatically if no key is pressed for 10 minutes and when the operator termi-
nal is switched on.
Superuser mode (granting Superuser rights)
Superuser mode is reserved exclusively for use by service personnel!
- In the Main Menu choose item 9 Parameter Setting.
- In this menu choose item 3 Block.
- Enter the current date in reverse order (not shown on display).
- Press the ENTER key (
↵
) to confirm, causing "S" to be shown on the screen.
- Press the ESC key to exit the screen.
Example:
The current date is April 17, 2035, which in order of day−month−year is 17.04.35. In this instance the entry requi-
red to grant Superuser rights is 534071.
Unblocking from the main menu cancels entry block for all components of the CAN bus system. If
you have moved to the operator interface of a CAN bus station but have omitted to cancel entry
block, simultaneously press the
MODE and decimal ( . ) keys to cancel entry block for the particular
controller. Entry block is reactivated on exiting the operator interface for the controller.