Eci Telecom B-FOCuS 270 Скачать руководство пользователя | Manualshive

Страница: 32 / 67

background image

B-FOCuS 270/285/400 PR

Configuration Manual

ECI Telecom Ltd. Proprietary

32

5.6. IGMP

Proxy

The IGMP Proxy is used for transferring video and television channels over telephony
infrastructure. You can see a summary table of all the interface definitions as well as
the parameters of each interface separately.

The IGMP-Proxy is configured on WAN interfaces. The IGMP-Proxy-router is
configured on any available LAN interface. The IGMP-Proxy-Router periodically
sends a query over all of the interfaces that are configured as IGMP-Proxy-Router
interfaces. It does so in order to determine which groups have members on IGMP-
Proxy-Router interfaces.
The IGMP-Proxy-Router receives IGMP reports from IGMP hosts and maintains a
list of group membership for each IGMP-Proxy-Router interface. If the IGMP-Proxy-
Router finds a "new multicast group join," it will send an IGMP join report to the
Multicast Router over the IGMP-Proxy interface. When the IGMP-Proxy-Router
receives an IGMP leave report, it sends a group-specific query over the IGMP-Proxy-
Router interfaces. If it doesn't receive any response to that group-specific query, and
the WAN Multicast Router type is Version 2,then the IGMP-Proxy sends a leave
report to the WAN Multicast Router over the IGMP-Proxy interface.
After the IGMP-Proxy receives a general query from the WAN Multicast Router, the
IGMP-Proxy starts timers for all registered multicast groups. Once timers expire, it
will send a group-specific report to the WAN Multicast Router over the IGMP-Proxy
interface.
When the IGMP-Proxy receives the IGMP report for a specific group, the IGMP-
Proxy stops the timer for that specific group and doesn’t send.an IGMP report for that
specific group to the WAN Multicast Router.

To add a new interface:

1. Click

Add

. The IGMP Proxy Configuration dialog box appears.

2. Define the proxy interface and the router interface and click

Apply

.

«
...
30
31
32
33
34
...
»

Содержание B-FOCuS 270




































































Отзывы:

Нет отзывов

Похожие инструкции для B-FOCuS 270

Бренд: Barracuda Networks Страницы: 2

AirPlus DWL-810

Бренд: D-Link Страницы: 25

Бренд: E-Lins Страницы: 59

Бренд: E-Lins Страницы: 11

Бренд: E-Lins Страницы: 9

Бренд: E-Lins Страницы: 5

Network Video Recorders

Бренд: e-Line Technology Страницы: 34

AirStation WHR-G300N

Бренд: Hornington Страницы: 6

SABVISION NVR32

Бренд: SAB Страницы: 29

Elinx ESW200 Series

Бренд: B&B Electronics Страницы: 20

Бренд: Kaptia Страницы: 14

3C8567 - SuperStack II NETBuilder SI 567...

Бренд: 3Com Страницы: 6

Бренд: PairGain Страницы: 80

HomePNA PCI Adapter

Бренд: City-Netek Страницы: 18

Бренд: B&B Electronics Страницы: 2

Бренд: LevelOne Страницы: 142

Бренд: ORiNG Страницы: 101

Бренд: Transition Networks Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды