manualshive.com logo in svg

Eci Telecom B-FOCuS 270, Руководство по настройке

Поделиться
Скачать
Eci Telecom B-FOCuS 270 Скачать руководство пользователя страница 50

B-FOCuS 270/285/400 PR  

Configuration Manual 

ECI Telecom Ltd. Proprietary

  

 

50 

6.5.2. Basic Workflow 

 

To define PPP over ATM using the advanced method: 

1.  From the Advanced operations menu select 

WAN Configure.

 

2.  In the VCC tab click 

Add

. The VCC Configuration dialog box appears. 

3. Select the 

PPPoA

 radio button. Define: VPI, VCI, Profile ID, user name 

(<name>@<domain>) and password, authentication protocol (PAP), a ppp 
interface, encapsulation type (VC), subnet mask and trace. Enable NAT.  

Note:

   You can define a few Profile IDs, but only one of them is active. This means that you 

can define a few users on the same interface, but when one of them is connected to 
the ISP, the others cannot be connected. 

 

4. Click 

Apply

. Check that a line is added in the VCC tab. 

5.  Select the PPPoA tab and check that the interfaces you have defined are displayed. 

 

6.  Note that the interface you have defined in the Basic menu appears in ppp0 (the 

first available ppp interface, before the one you have defined in the Advanced 
menu is selected by default). It has been assigned by default Profile ID 0. The 
interface you have defined in the Advanced menu appears with the values you 
have just defined. 

7.  If you have defined a few channels, you must identify one of them as the default 

channel. Click one of the radio buttons and click 

Default

. The selected interface’s 

Default parameter becomes Yes. 

Содержание B-FOCuS 270




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды