Eci Telecom B-FOCuS 270 страница 56 Скачать руководство пользователя | Manualshive

Страница: 56 / 67

background image

B-FOCuS 270/285/400 PR

Configuration Manual

ECI Telecom Ltd. Proprietary

56

7.2. Proper Version Upgrading

Phenomenon

:

You cannot access the Configuration definition graphical user interface (GUI). When
defining the address 192.168.1.1, an error message appears.

Possible solution:

The new version has not been installed properly. There might have been a power
failure during the upgrade, or the new file was faulty or wrong. In this case, the router
uses a basic software version (called Recovery), which is always burned in its flash
memory. This version is not supported by the GUI and must be accessed using other
tools.

To solve the problem:

1. Check that there is no communication problem between the computer and the

router. Open a command line (Start > Run > cmd) and type:

ping 192.168.1.1

. If

the communication fails, there might be a hardware problem, either in the router
or in the connecting cable. If the communication is fit, continue to the next step.

2. Communicate with the router using the Telnet protocol. In the command line type:

telnet 192.168.1.1

. A login prompt appears.

3. Type

admin

. The word Password appears.

4. Type the password received from your ISP.
5. Type

version

. The name of the file in the flash memory appears. If the name is

Recovery, this is the basic version. Continue to the next step for loading the
upgrade version. If the name of the upgrade file appears (like in the shown
example), this is not the case. Try restarting the router.

login: admin
Password:
]admin @ home]$ version
INOVIA TELECOM ETHERNET ROUTER20030630
]admin @ home [

$

6. To load an updated version when the GUI is not available, use FTP. Before you

begin, copy the updated version to the computer’s C:\ directory. Open a command
line and type:

ftp 192.168.1.1

. A message appears: User (192.168.1.1 (none)).

7. Type

admin

. The word Password appears.

8. Type the password you have received from the ISP. A message appears: User

logged in.

9. Type

ha

. A message appears: Hash mark printing On.

10. Type

bi

. A message appears: Type set to I.

11. Type

lcd C:\.

A message appears: Local directory now C:\.

12. Type:

put <file name.bin> app2

, where “file name.bin” is the name of the

updated version file. The version file is being loaded. At the end of the process, a
message appears: Transfer Complete.

13. To exit type:

bye

.

«
...
54
55
56
57
58
...
»

Содержание B-FOCuS 270




































































Отзывы:

Нет отзывов

Похожие инструкции для B-FOCuS 270

8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink

Бренд: Tyco Electronics Страницы: 18

Бренд: 4RF Страницы: 7

Бренд: Linksys Страницы: 2

Бренд: TC Electronic Страницы: 174

INTERNET PRIVACY PROTECTION

Бренд: AlphaShield Страницы: 49

RabbitCore RCM4400W

Бренд: Rabbit Страницы: 126

ControlPoint 2000

Бренд: 4Home Страницы: 20

Бренд: Ubiquiti Страницы: 20

InvenSense RoboKit1

Бренд: TDK Страницы: 13

Бренд: Supermicro Страницы: 27

InnoMedia MTA 3328-2R

Бренд: VoiceLine Страницы: 18

Бренд: ANEP Страницы: 48

Бренд: Ubiquiti Страницы: 23

Secure Site Manager 16

Бренд: Black Box Страницы: 16

Monochrome Image Acquisition Device NI 1410

Бренд: National Instruments Страницы: 34

Бренд: DayTronic Страницы: 13

Бренд: RouterBOARD Страницы: 4

Бренд: Axis Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды