3
XSTORAGE HOME 3P INSTALLATION MANUAL
MN700009EN August 2020 www.eaton.com
00
Title
1.2.3 Mandatory action symbols
1.2.4 Other symbols
Read the instructions. These instructions are intended for Eaton certified installers.
The notes preceded by this symbol relate to technical issues and ease of operations.
IP21 Protection class rating.
A threaded plug fuse cannot be used as a load circuit breaker.
Do not use measuring instruments with a maximum input voltage lower than 1000 V.
During the installation, make sure that the inverter is powered off.
The EU Directive on Waste Electrical and Electronic Equipment (WEEE).
Should the noise level exceed legal limits, the working area must be circumscribed and all the
people who have access to the area must wear ear defenders or ear plugs. The noise level
produced by the inverter in normal working conditions is: < 50 db.
A first aid kit must be provided. Do not underestimate burns or wounds.
The instructions provided in this manual do not replace the safety regulations and the installation
and operational technical data printed on the products, nor do they replace the current safety
standards enforced in the country where the equipment is installed, and the rules dictated by
common sense.
The Eaton certified installer must be an expert in the field and must therefore be responsible
for commissioning the system according to the manufacturer’s instructions and local legislation.
Any repair or replacement of parts of the system must be performed exclusively by Eaton
certified installers.
The ropes and vehicles used for lifting must be suitable for withstanding the weight of
the equipment.
