36
XSTORAGE HOME 3P INSTALLATION MANUAL
MN700009EN August 2020 www.eaton.com
00 Title
•
In the case of multiple installation of several xStorage Home 3P systems, a side clearance of 500 mm
between the units must be provided.
•
The xStorage Home 3P system must be used at a maximum altitude above sea level of 3000 m
(9750 feet). For altitudes above 2000 m, due to the rarefaction of the air, specific conditions may occur
which must be considered when choosing the place of installation. All installations at altitudes above
2000 m must be assessed case by case considering the following critical issues:
•
Less efficient cooling;
•
Decrease in the dielectric strength of the air and, in the presence of high voltages, the creation of
electric arcs;
•
Presence of cosmic radiation that can affect the correct functioning of the electronic components.
Do not mount the xStorage Home 3P system above or under flammable building materials.
Do not install the xStorage Home 3P system in areas where highly flammable substances are present.
Do not install the xStorage Home 3P system in areas subject to explosion hazard.
To prevent the risk of electric shock or other injury, check that there are no electrical or hydraulic lines in
the walls before drilling the mounting holes of the xStorage Home 3P. Please note that the appropriate
type of plastic plugs and screws must be selected by an Eaton certified installer, based on the following
considerations:
•
the installation location, as well as;
•
the type of the wall on which the system is to be mounted;
to ensure that the mounting of the xStorage Home 3P hybrid inverter is done as safely as possible.
Make sure there is enough free space for air circulation around the xStorage Home 3P system. Local
regulations may require larger clearances.
If you mount the xStorage Home 3P system in a cabinet, a piece of furniture or in another relatively small
closed space, it is necessary to ensure enough air circulation to dissipate the heat generated by the unit.
5.5 Mounting the xStorage Home 3P system
The xStorage Home 3P is delivered with a wall mounting bracket suitable for use on most walls.
How to mount the xStorage Home 3P:
1. Fix the top and bottom mounting brackets to the xStorage Home 3P body (Follow the
instructions shown in
Figure 2
).
2. Drill the holes to fix the xStorage Home 3P mounting support on the wall.
3. Fix the mounting support to the wall.
4. Install the xStorage Home 3P.
5. Fix the xStorage Home 3P to the wall using the bottom bracket fixing screw.
